Disposable Anastomat ZSR 2.0 | anastom.at - Improved Second Generation
Support and Helpline: +48 737-488-443 | kauf@anastom.at
Secure Shopping | Free Delivery
Version 2.0 – Improved Second Generation

Disposable Anastomat ZSR 2.0 – New Generation of Circumcision

Minimally invasive, safe, and painless phimosis treatment in 7 minutes. Without traditional sutures, with perfect and fully reproducible cosmetic results.

Distributor: UNIBUY GMBH Sp. z o.o. | Headquarters: Chmielna Street, Warsaw | Logistics Center: Warsaw Ursynów (near Chopin Airport) with wholesale and retail distribution in the European Union.

CE0123 Certification
FDA Approved
Official Distributor anastom.at
Disposable Anastomat ZSR 2.0
Urological Stapler Original ZSR Model

Distributor in the EU - UNIBUY GMBH Sp. z o.o.

Confirmed by Clinical Studies

Clinical Superiority over Traditional Methods

A multicenter randomized clinical trial on a sample of 942 patients demonstrated the undisputed superiority of the ZSR 2.0 anastomat.

Procedure Speed

The average surgical procedure time using the ZSR 2.0 anastomat is only 7.6 minutes, compared to 21.4 minutes with traditional scalpel surgery.

Time reduction of over 60%

Minimal Blood Loss

During incision and simultaneous anastomosis, blood loss averages only 3.8 ml compared to 16.5 ml with traditional surgical excision.

Reduced bleeding risk

Faster Recovery

Complete healing of the postoperative wound occurs after an average of 15.5 days compared to 23.6 days when using traditional manual surgical sutures.

Shorter healing time by approx. 8 days

Reduced Pain

Minimal intraoperative pain (average pain index score 1.9 / 10 vs 6.2 / 10 in the traditional method) when using 5% lidocaine cream.

Comfortable and safe procedure

Maximum Safety

0% wound infections recorded in the clinical study group. Drastic reduction of postoperative edema (only 1.9% of patients vs 21.3% with traditional procedure).

Minimal risk of complications

Perfect Aesthetics

A perfectly even, clean line of mechanical cutting and automatic anastomosis ensure the highest possible patient satisfaction rate with wound appearance.

No irregularities from manual suturing
Gold Standard of Urology

Automated Precision in the Hands of Specialists

Designed in collaboration with leading urological clinics. The ZSR 2.0 Anastomat combines the highest safety of mechanical suturing with perfect, reproducible cutting aesthetics in just a few minutes.

Design Improvements

Advanced Technological Solutions of Version 2.0

1

Silicon Healing Ring

Innovative ring integrated with staples. Stabilizes the suture, significantly improves intraoperative hemostasis, prevents keloid formation, and stimulates natural, painless staple detachment during the healing period.

2

Complete Anatomical Protection of the Frenulum

A specially built-in, concave metal socket in the device footplate completely protects the sensitive frenulum area of the penis, eliminating the risk of accidental damage.

3

Visual Control of Pressure and Cutting

An enlarged surgical window and precise laser marking line guarantee the urologist full control over pressure force and trigger mechanism precision.

4

Handle Lock (Release After Click)

Automatic locking and release of the cutting-stapling mechanism after a single trigger pull. Eliminates the need for prolonged, tiring manual pressure during the procedure.

ZSR 2.0 Technical Specifications

  • Device Classification:Class IIa (Medical Device)
  • Sterilization:Ethylene Oxide (EO), sterile blister
  • Staple Material:High-purity medical titanium
  • Blade Material:Japanese surgical stainless steel
  • Available Sizes:14 mm, 18 mm, 22 mm, 26 mm, 30 mm, 34 mm
  • Regulatory Compliance:FDA, CE0123, ISO 13485

Version 2.0 introduces additional cytotoxicity and biocompatibility tests for the silicon healing ring, eliminating the risk of inflammatory reactions.

Comparison of Procedural Methods

Why is the ZSR 2.0 Anastomat the Gold Standard?

👉 swipe the table to see all methods →

Parameter Traditional Surgery Ring Methods Laser Circumcision (CO2) Anastomat ZSR 2.0
Procedure Time> 30 minutes> 15 minutes15 – 30 minutes3 – 10 minutes
Blood LossAbundantSlightMinimizedMinimal / None
Postoperative Pain3–4 daysUp to 1 weekMild/moderateNone (discomfort up to 15 min)
Suture RemovalRequired after 10 daysPainful ring removalOften requiredNone – fall off naturally (7-14 days)
Sexual Abstinence2 months2 months4–6 weeksOnly 1 month (4 weeks)
Wound AestheticsRisk of keloidsRisk of ruptureSurgeon-dependentIdeal, mechanical symmetry
Human FactorCritical (manual)MediumVery highMechanically automated

Precautions and Legal-Medical Requirements

Single Use Only

ZSR 2.0 is a sterile device intended for single use on one patient. Re-sterilization and reuse are prohibited due to the risk of cross-contamination and loss of blade cutting properties.

Required Medical Qualifications

Procedures using the ZSR 2.0 urological stapler may only be performed by qualified medical specialists (urologists, surgeons) trained in device operation.

Precise Size Selection

Proper measurement should be performed at room temperature at a 40-degree angle parallel to the corona of the glans using the dedicated ZSR measurement template. Golden rule: In case of a borderline measurement between two sizes, always select the larger size. Available device versions: 14 mm, 18 mm, 22 mm, 26 mm, 30 mm, 34 mm.

Postoperative Care and Recovery

After the procedure, the patient should avoid strenuous physical exercise to minimize the risk of hematoma formation. Medical staples together with the silicon ring fall off spontaneously within 7-14 days. In rare cases, when individual staples remain in the skin after 3-4 weeks, manual removal in a medical office is required. In case of severe edema in patients with allergic tendencies, the attending physician may recommend anti-inflammatory or antihistamine medications.

Documentation and Compliance

Certificates and Declarations

Complete compliance documentation for the ZSR 2.0 Anastomat medical device — available for review.

Declaration of Conformity

Declaration of Conformity (DoC) — EU declaration of conformity for the device.

View PDF

CE Certificate — ZSR Q5

Certificate No. 094301-0003 (Rev. 03), notified body CE0123.

View PDF

CE Certificate — ZSR G10

Certificate No. 094301-0005 (Rev. 00), notified body CE0123.

View PDF
Direct Order

Configure ZSR 2.0 and Order

Official distribution for the Polish market.

Stapler Size (diameter) Quantity

💡 Golden rule: If the measurement falls in between, always select the larger model.

Total Units

0 pcs.

Total (gross)

0.00 PLN

Why anastom.at

Values and Standards That Define Us

Excellent Online Customer Service

We offer an intuitive purchasing process and a wide range of urological products. We ensure a high price-to-quality ratio, tailoring our offer to the specifications and needs of every private clinic and urological practice.

Products Compliant with Standards

We guarantee the durability and quality of products from certified manufacturers. We supply not only urological staplers, but also specialized medical clothing, surgical masks, protective gloves, and orthodontic accessories (including impression trays, brackets, arches).

Professional Consulting

We provide comprehensive assistance from an experienced team in equipment selection and build long-term, secure business relationships. Financial transactions are conducted using certified WooCommerce payment gateways with SSL encryption.

Urological Consultation

Book a Professional Urological Consultation

Take the first step toward treatment. A qualifying consultation allows assessment of whether the procedure using the ZSR 2.0 Anastomat is the right solution for you.

  • Quick appointment — without long waiting in line.
  • Intimate atmosphere — complete discretion and conversation comfort.
  • Qualification by a specialist — individual assessment by a urologist.
500 PLN/ consultation

The consultation cost is 500 PLN and is fully credited toward the cost of the subsequent procedure — the qualifying consultation is then free.

We usually call back the same business day.

Official Distributor

Learn More About the Product

We are a certified distributor of medical equipment and devices. We offer full technical support, wholesale order handling, and fast shipping from our distribution center in Warsaw.

Office Address

anastom.at (UNIBUY GMBH Sp. z o.o.)
Chmielna Street, 00-020 Warsaw

Logistics Center & Warehouse

Warsaw Ursynów (near Chopin Airport)

Helpline & Email

Tel: +48 737-488-443 (Mon - Fri 8:00 AM - 4:00 PM)
Email: kauf@anastom.at

Contact Us

© 2026 anastom.at (UNIBUY GMBH Sp. z o.o.). All rights reserved. All presented devices are intended exclusively for professionals.

Availability Verification (Medical Device)

Legal Requirement

The presented medical device is intended exclusively for use by qualified professionals (physicians, medical personnel).

Are you a medical professional or do you operate a medical entity?

Inquiry Sent!

Thank you. Our team will contact you promptly.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.